Light Up a Fall Backlit Shadow Box this Halloween!

Instructions

STEP 1: GET MY FREE BACKLIT SHADOW BOX DESIGNS

First, download my Backlit Shadow Box designs from my free library – look for Design #616. Alternatively, you can use the Save This Project form near the top of this post and the design link will be emailed to you.

In the SVG folder, you’ll find three designs sized for a 10” x 10” shadow box: butterflies, flowers, and a succulent.

There is also a DXF folder with cut files, and a PDF folder with versions you can print and cut by hand.

Upload the files you need to Cricut Design Space to get started.

I’ll show you how I prepared and assembled the succulent backlit shadow box design.

TIP: If you’re not sure how to upload, go to jennifermaker.com/svgs to learn how to unzip and upload SVG files.

STEP 2: PREPARE AND CUT YOUR BACKLIT SHADOW BOX DESIGN

CRICUT DESIGN SPACE

1. First, open Cricut Design Space and click “New Project.”
2. Click “Upload,” then click “Upload Image.”
3. Click “Browse” and select the SVG design of your choice.
4. Click “Open.”
5. Click “Continue” and finally click “Upload” to add the design to your Canvas.
   
   NOTE: I'll demonstrate with the Succulent design.
   
   
   
6. Ungroup the design.
7. Drag the top layer with the design to the side.
8. The white layer with the design will be cut from layered vinyl and cardstock, and the gray solid layer is optional and can be cut from vellum. If you don’t want to use vellum, delete the gray layer.
9. Click the “Save” button at the top to give your design a name and save it.
10. There’s nothing else to do, so you’re ready to prepare your material and cut!
    
    

CUTTING

1. Select the correct machine from the top right drop-down menu.
2. Click “Make.”
3. On the Prepare screen, make sure the correct Base Material Size is selected for your materials.
4. Select the first mat and click “Continue.”
5. On the Make screen, I used the “Vellum” setting with “Default” Pressure for the vellum, and the “Cardstock (for intricate cuts)” setting with “More” Pressure for the layered cardstock and vinyl.
   
   
   
   
   
6. If you aren’t cutting vellum, skip to step 13. If you are cutting vellum, place a piece of vellum at least 11” x 11” onto a green StandardGrip machine mat.
7. Use a brayer to fully and evenly adhere the material to the mat.
   
   
   
8. Check that your Premium Fine-Point Blade is clean and in the clamp.
9. Press the flashing “Load/Unload” button to load the prepared mat into your Cricut.
10. Press the flashing “Go” button to begin cutting.
11. When it has finished cutting, don’t unload the mat right away. Instead, gently lift a corner of the material to make sure it is cut all the way. If not, press the “Go” button again to make the same cuts in the same spots.
12. When the cuts are complete, unload the mat, flip it over onto your work surface, and roll it back to release the cut vellum.
    
    TIP: If you have trouble removing the vellum from a green StandardGrip machine mat, try cutting a new piece on a blue LightGrip mat – or even an older, not-so-sticky StandardGrip one.
    
    
    
13. Place a 12” x 12” piece of cardstock face down on your work surface.
14. Cut a piece of vinyl at least 10.5” x 12”, but no larger than 12” x 12”.
    
    
    
    TIP: Use the grid on the back of the vinyl to help with measuring and cutting – each square is ½” x ½”. If the vinyl curls a lot when it’s cut, place it under a heavy book for about an hour to flatten it out.
    
15. Starting on the short end of the vinyl, peel off the backing about 1”-1.5”.
16. Fold the backing down and crease it to keep it out of the way.
    
    
    
17. Turn the vinyl over and align the top and left edges of the vinyl’s sticky side with the top and left edges of the cardstock.
18. After it’s lined up, carefully press the vinyl down against the cardstock.
    
    
    
19. Grab your XL scraper tool and press along the vinyl that is attached to the cardstock to smooth it out and get rid of any bubbles.
    
    
    
20. Reach underneath the vinyl sheet with one hand and peel the backer off little by little, using the scraper with your other hand to press the vinyl onto the cardstock as you go. Go slowly, using the scraper to push any wrinkles or bubbles out before the vinyl is fully pressed onto the cardstock.
    
    
    
21. Once the vinyl is completely adhered to the cardstock, flip the sheet over and check if any excess vinyl shows along the sides. Trim it off with scissors if you see any, but be careful not to cut the cardstock.
    
    
    
22. Place the vinyl/cardstock combination vinyl-side down onto a green StandardGrip machine mat, making sure the area of cardstock NOT covered by vinyl is either at the bottom or the right side.
    
    
    
    NOTE: If you’re using shimmer vinyl, use a brand new, super sticky green StandardGrip machine mat (or a purple StrongGrip machine mat) for best results.
    
    TIP: If there are any areas with bubbles or wrinkles in the vinyl, position them on the bottom or right side as well.
    
23. Use a brayer to fully and evenly adhere the material to the mat.
24. Check that your Premium Fine-Point Blade is clean and in the clamp.
25. Press the flashing “Load/Unload” button to load the prepared mat into your Cricut.
26. Press the flashing “Go” button to begin cutting.
27. When it has finished cutting, don’t unload the mat right away. Instead, gently lift a corner of the material to make sure it is cut all the way. If not, press the “Go” button again to make the same cuts in the same spots.
    
    
    
    TIP: If you have any issues with your cuts, check out my Tips for Cleaner Cuts tutorial.
    
28. When the cuts are complete, unload the mat, flip it over onto your work surface, and roll it back to release the design.
    
    TIP: Use a spatula tool to help lift delicate pieces without tearing.
    
29. Use a weeding tool to poke out any pieces that remain inside the design.
    
    
    
30. Here is what my cut and weeded design looks like.
    
    
    

STEP 3: ASSEMBLE YOUR BACKLIT SHADOW BOX

1. Place the design vinyl-side down on your work surface.
2. Starting with the outer shapes, fold each cut piece forward at an angle at the base of each “petal.”
   
   
   
3. As you move toward the center of a petal, gradually fold the pieces at a larger angle to get a more even-looking light effect when the design is lit.
   
   TIP: Use your small scraper tool to help get a straight crease on your folds.
   
   
   
4. Follow steps 2-3 to fold the rest of the petal pieces the same way.
   
   TIP: Rotate the design as you go for easier access to the inner pieces.
   
5. Grab your shadow box frame. Remove the backing, inner spacer piece, and glass and carefully set them aside.
6. With the top of the design pointing away from you, insert the design into the shadow box frame, cardstock side down.
   
   
   
7. Carefully set the frame with the design aside.
8. Grab the frame’s inner spacer piece and place it on your work surface.
9. Grab your LED strip lights and insert the correct batteries into the battery compartment.
10. Test the lights to make sure they work.
11. Find the end of the strip light that is connected to the battery pack.
12. Peel back the adhesive backing a couple of inches, and starting at a bottom corner of the inner frame piece, press the sticky side of the lights onto the frame piece’s very top edge.
    
    
    
    TIP: I find the light strip easier to work with if I unroll it all the way before attaching it to the frame’s inner piece.
    
13. Continue pressing the light strip along the top edge of the inner frame piece, keeping the strip as straight and flush as possible.
    
    
    
14. As you come to each corner of the inner frame piece, press the light strip as squarely as possible into the corner.
    
    
    
15. As you come to the place where you started, angle the lights down so you can start another row parallel to the one before.
    
    
    
    TIP: Three rows of strip lights fit snugly along the inside of the inner frame piece of my 10” x 10” shadow box, so make sure to press each row up against the previous one to fit them all.
    
16. Repeat steps 13-15 until there are three complete rows of lights attached to each inner side of the frame spacer piece.
    
    
    
17. When you reach the end of your last row of lights, find the closest spot on the light strip with plus (+), minus (-), and scissors symbols, and cut on that line with scissors.
    
    
    
18. Press the loose end of the lights onto the inner frame piece and discard the cut light strip.
19. Grab the shadow box frame with the design (cardstock-side down) inside. Place it on your work surface so the top of the design is pointing away from you and the back of the frame is face up so you can see the vinyl.
    
    TIP: Be careful when moving the frame with the folded design inside. The folded cardstock pieces will be unprotected against the work surface, and may bend or tear if handled roughly.
    
20. Place your cut piece of vellum inside, on top of the design. If you didn’t cut any vellum, skip this step.
    
    
    
21. Carefully pick up the piece of glass and place it inside the box, on top of the vellum.
    
    
    
    NOTE: Be very careful not to slide your fingers along the edges or corners of the glass – it’s very sharp.
    
22. Place the frame’s spacer piece with the attached lights into the shadow box, on top of the glass. Make sure that the wire leading to the battery pack is on the bottom.
    
    
    
23. Set the frame aside.
24. Grab the frame’s backer piece and place it on a self-healing cutting mat so the hanger is facing up, at the top.
25. Use your Cricut TrueControl Knife or craft knife to cut a small diagonal notch on the same corner as where the wire hangs out on the frame. It will take several passes of the knife to cut through the board. Just be patient and don’t push too hard or the blade may slip.
    
    
    
26. Then cut through the padding on the backer piece the same way.
27. Grab the shadow box and place it back on your work surface, making sure the top of the design is facing away from you.
28. Place most of the lights’ wire into the frame, and leave a few inches (where it’s connected to the battery pack) hanging out the corner of the frame.
    
    
    
29. Insert the frame backer piece, with the notch lined up with the wire, and the hanger on the outside at the top, on top of the insert.
30. Push the metal prongs down over the backer to hold everything in place.
    
    
    
31. You can attach the battery pack to the backer or bottom with glue dots, or leave it detached and set it behind the frame when it’s displayed.
    
    
    
32. Flip the frame over and adjust any folded pieces if needed.
    
    

STEP 4: SHOW IT OFF

Here is what my finished Backlit Shadow Box looks like.



Use the remote to turn the lights on for a beautiful display!