Share the love!

Learn how to make summer fruit watercolor projects using Cricut-drawn designs!

Are you intimidated by watercolor painting, but love the organic, beautiful colors the medium makes? With a little help from your Cricut and my free summer fruit watercolor design files, you can start using watercolors today! That’s because there are special watercolor markers that work with your Cricut. I created the files so the machine puts the right color and amount of ink right where you need it. Then, you can follow my tips to bring the designs to life with just water and a paintbrush!

Want to save this project? Enter your email address below and we’ll send the project straight to your inbox. 
For tips on preparing and painting the summer fruit watercolor designs, watch my original full step-by-step DIY watercolor cards tutorial:

Get the free SVG cut file for this project

I really love the Cricut watercolor markers! They’re bright, less messy than many watercolor products, and you can customize your designs by using the colors in different spots. I chose summer fruits as my subjects to highlight just how vibrant these markers are. Plus, I was able to turn my orange design into a lime just by using a green marker instead of the orange one! They look so summery with my bright yellow lemon design!

The markers come with a special brush, but you can also use a normal damp paintbrush. You fill the tool by putting water in the tube of the brush, then lightly squeezing it to get the bristles damp. You can make the designs without painting them right away, because they stay ready to paint for at least several weeks. That makes them a great gift

When gifting a watercolor painting design, make sure your friend knows there’s no right or wrong way to paint! My video does include tips on color and water management you can apply to these designs, though. For example, when you’re painting where colors join (like where the strawberries’ leaves meet the fruit) start on one section like the lower leaves. Let them dry while your work on the rest of your painting without getting near the green paint. Then work on the nearby red once the leaves dry.

If the person you’re making these summer watercolor design cards for (or you!) isn’t familiar with watercolors or the markers, providing a little extra info will help get them started with new products.

My original Cricut watercolor tutorial with animals includes a practice “HELLO” SVG so you can learn how to control the marker line placement and avoid mixing colors before you’re ready. The original tutorial has steps to make a few Hello designs before jumping in to the illustrations.

They can turn this simple design…

list of colors to right of warmup hello file

… into their own watercolor card!

A DIY watercolor card featuring the word painted with Cricut watercolor markers.

Once the technique becomes familiar, try painting a couple of the fruits as cards!

Or, frame the design to make instant decor, like this cardinal from  my first set of Cricut watercolor marker designs.

A framed DIY watercolor card featuring a cardinal made with Cricut watercolor markers.

The process uses water to manipulate the pigmented form line by line, so you can go light on brighter areas, or create darker shadows, like this cactus from my second watercolor design collection

A notecard with a watercolored painted potted cactus rests on top of an envelope, on a whitewashed wooden surface with plants nearby. Learn how to paint watercolor plants with a Cricut! With JenniferMaker's tutorial, you can learn how to paint with watercolor and Cricut!

Plan ahead, and you can even get a head start on some fall watercolor cards using the same steps!

Let me show you how easy it is to make summer fruit watercolor projects! This post contains some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)! Read my full disclosure policy.

Materials to Make Summer Fruit Watercolor Cards

View my Amazon shopping list with the exact items we used to make the original project.

  • Design #625 (My free SVG/DXF/PDF design files are available in my free resource library – get the password by filling out the form at the bottom of this page)


How to Make Your Own Watercolor Cards

DIY watercolor cards with different birds made with Cricut watercolor markers.

DIY Watercolor Cards

Yield: 1 Card
Prep Time: 30 minutes
Active Time: 30 minutes
Total Time: 1 hour
Difficulty: Easy to Medium
Estimated Cost: $20-$30

Learn how to make DIY watercolor cards featuring birds your Cricut can draw with watercolor markers!



You can download my free DIY watercolor design SVG/PDF/DXF files from my free resource library. Look for Design #457. You can trace the printable PDFs or use the other files with cutting machines. I'll show you how to prepare the SVGs in Cricut Design Space to make on a Maker or Explore series machine.

The SVG folder contains five files:

Hello warm up design

hello warm up design on canvas


cardinal svg on design space canvas with completed colors

Hummingbirdhummingbird svg on design space canvas with completed colors


lovebirds svg on design space canvas with completed colors

Peacockpeacock svg on design space canvas with completed colors

I suggest starting with the warm up design, so upload the file you want to your software and Add it to the Canvas.

If you’re not sure how to upload an SVG file to Cricut Design Space, watch this helpful video SVGs Made Simple training series I made. It will help you SO much!

If you're on an iPhone or iPad, here's how to download and upload SVG files to the Cricut Design Space app.


This is what the warm up design looks like on my Canvas. You can zoom in to see the details by clicking on the plus (+) sign on the lower left.

watercolor warmup hello in design space

We need to adjust a few things to make the design draw out correctly. Practicing on this file will prepare you to work on the animal designs.

Notice the list of colors to the right of "Hello" on the Canvas? Each color is grouped with part of the main design. These will help you define which color you need to assign to the different layers of the image.

list of colors to right of warmup hello file

Select the image and under the "Operation" menu, select "Pen".

Next click "Ungroup" in the Layers Panel.

ungrouping image in design space

Select the first group in the Layers. You will see in this grouping that the color you need to select is purple.

selecting first grouping in layers

Click on the color box under the "Operation" menu. Select "M-Marker (1mm)" and then "Purple (Watercolor)"

Now that this color has been defined, delete the layer that shows the word "purple" in the Layers.

deleting the word purple

Repeat this for the rest of the groups in the Layers menu.

Your design should now look like this.

warmup image with all pen colors defined in design space

Select all the layers and click "Attach" found at the bottom right of your screen.

attaching all of the pen lines

Make sure the correct machine is selected and then click "Make it".

If prompted, select "On Mat" and "12" x 12" in the pop up.

We're using smaller paper, but leave the Material Size at "12" x 12". We'll just place it strategically on the mat.

We'll use the Prepare screen to correctly place the watercolor card on a 12" x 12" Green StandardGrip Machine Mat. Since the design is wider than it is tall, we'll make the card in landscape orientation and add the colors to the front.

Open the card and hold it face up with the crease running horizontally and the front panel at the bottom.

To make lining things up easier, match the crease to a horizontal line on the mat and line up the left edge with a vertical mat guide. I place the crease at the 5" mark and the left edge at 1". That means the front panel is between 1" and 7.5" horizontally and 5" to 9.75" vertically. We'll need to remember that!

Press it down with the brayer.

Back in Design Space, click and drag the image to the mat area where you put your card's front. Roughly center it if you like in the card's horizontal area, just make sure it's below the horizontal 5” line but above 9.75" so it won't draw on the crease and will all be on the paper. Always double check your measurements and text placements.

design space mat placement of image

Click Continue.

Set your base material to "Heavy Watercolor Paper - 140lbs (300 gsm)".

Load the first watercolor marker into clamp A following the prompt on the screen.

place watercolor marker in clamp A

Load you mat, making sure the card orientation and placement matches the screen. Press the flashing button to begin drawing. The Cricut will pause and prompt you to swap the colors of the markers when it's ready.

When image is complete, unload the mat, flip it over, and roll it back to release the notecard without curling.


Now it's time to paint! This may seem daunting, but it's not. No two watercolor paintings will look the same, even when a Cricut is involved!

First let's prepare your brushes. While the brush included with your watercolor markers works for all of these designs, you may find it easier to use a smaller brush tip for some. Remove the brush cap. Unscrew the brush tip from the water chamber.

Fill the chamber with water, leaving about a thumb's width unfilled, and put the brush tip back on.

watercolor brush with water in it but not overfilled

Hold the brush over a paper towel and gently squeeze the water chamber until water starts coming through to the bristles. If this is the first time you are using the brush, it may take a couple of squeezes.

You want your brush to be wet, but not dripping with water. Blot the brush on the paper towel to remove excess water.

With a damp brush, drag it along the inside of the line on the letter H. Coax the red and orange colors away from the drawn lines and into the center of the letter.

Continue to brush along the inside lines of the H. If your brush seems dry, gently squeeze it to draw more water to the tip.

TIP: When refreshing your brush with water, test the wetness on a paper towel to make sure your don't have too much water on it.

When you have completed the first letter, clean your brush by squeezing and blotting on a paper towel until no color shows. It's important when changing colors to clean your brush so that you don't transfer unwanted colors into other areas of your painting.

Continue the same method with the other letters. Feel free to experiment with different amounts of water on your brush.

You can lighten dark areas by applying a clean, dry cotton swab to an area of paint. When the swab touches this part of the painting, it will lift some of the colored water off of the paper. You can continue lifting color off until you are satisfied.

Let the painting dry for about 30 minutes to an hour. It should be dry to the touch. This is what my warm up card looks like when finished.

completed hello warm up notecard

The animal images work just the same as the warm up image. They look much more complex, but I promise they use the same techniques!

If you want to experiment with blending and saturating or lightening colors before tackling an animal, draw more copies of the Hello design to practice on. Line them up in chronological order and you'll see how your technique changes! Watercolor is fun because it's controlled uncertainty. You can place paint and water in the same exact way and never get the same results, and that's totally ok!

I will show you the steps on how I painted each of the animals. I drew them on the 5.8" x 8.3" watercolor paper to make framable artwork.


This is what the cardinal looks like right after it's drawn.

With a damp brush, start with the black area around the eye. Outline the area by connecting the outside marks like a dot-to-dot pattern. Try not to get the black on any of the other colored lines. Don't drag the black all the way inside the eye. Leaving a bit of white creates a highlight!


Next, fill in the black around the claws with a brush that is more dry than wet.

cardinal painting claws

Clean your brush and start blending the colors on the branch with a damp brush. Try not to touch the black from the claws to avoid bleeding. If you end up with a little bit of white space, you can go back in and touch it up when it has dried. Watercolor is fun that way!

cardinal painting the branch

Make sure your brush is clean and blend the beak colors, making sure not to touch the black lines. Leave some white space in between them if possible.

Now we are going to paint the main part of the body. Your brush can be more on the wet side but not dripping with water. Starting at the head near the eye, pull the colors toward the top of the head. You can also add small strokes to show more feathers at the crown of the head.

Cardinal painting the head

Continue with the rest of the body by saturating the paint lines and drawing the colors away to the center of the body.

Work on the outer wings and legs the same way.

And then the tail feathers.

I purposely left some white space around the black area on the cardinal's face. This is so the black pigment didn't bleed into the other colored area. Let the painting dry for about 30 minutes to an hour. It should be dry to the touch. Using your black watercolor marker, touch up the white spaces.

cardinal touchup black marker

Now it is complete!


This is what the lovebirds look like right after they're drawn.

Start at the eyes. You don't want a lot of water on your brush. Just enough to push a little bit of paint into the center. Leave a white dot to highlight the eyes again. Fill in the claws with black as well.

Lovebirds painting black eyes

Clean your brush, and with a damp brush, paint the red beaks.

Lovebirds painting beaks

Next is the fun part! Using a wet brush we are going to start with the orange part on the left bird. Cover the orange lines with water and start dragging the water around the eye and down towards the yellow marks but don't touch any of the yellow yet.

Clean your brush and give it a squeeze to get water into it. Put your brush in the yellow marks near the orange. Get the yellow marks wet and then slowly let the yellow area touch the orange. Look at how the colors blend for you - magic! Continue along the yellow/orange border.

Clean your brush, then do the same for the yellow and green border.

For the tail, use a damp brush and at the top there is a black line on the green. Start your brush at that black line and drag down. This gives the tail a slight shadow.

Lovebirds painting tail

For the second bird, we will work the same way for the body. Leave the outer wing alone until you have completed the body.

Lovebirds painting the second bird

Paint the tail and the right leg.

For the outer wing, just like what we did for the tail, drag the black pigment away and onto the wing taking care not to touch the yellow paint.

Lovebirds painting outer wing

Clean your brush and using a damp brush, paint the branch.

When the paint has dried slightly - meaning it's not soaking and there aren't any puddles of water on the paper, you can touch up the white areas with a damp/dry brush. You don't need a lot of water, you're just pulling some of the damp colors into the white spaces.

Lovebirds painting touchup


This is what the hummingbird looks like right after its drawn.

Hummingbird line drawing

Use a clean, damp brush and fill in the beak and eye. Leave a white highlight in the eye.

Hummingbird painting beak and eye

Clean your brush. Next, the wings! Use a damp brush and gently glide it along the top wing section. Pull the color off the line and fill in the wing leaving just a little bit of white along the edge of the next section. You can mix the red in by pushing the color towards the tip of the wing.

With a clean brush we are going to start at the top of the head near the beak. Your brush should be wet but not dripping. Pull the blue near the beak up towards the top black marks and then down through the yellow and green lines to the base of the wings. Continue applying a wet brush around the eye and through all the green marks stopping near the blue marks.

Next, using a clean damp to wet brush, start dabbing the blue marks near the green. After you have saturated the blue a bit, you can start pushing the blue towards the green area.

Hummingbird painting blue area

Continue to brush over the blue marks and the belly, stopping near the green marks. Work the blue up into the wing.

Now start working the color into the green area under the wing.

When you get to the black outermost tail, pull your brush all the way down to the end.

Hummingbird painting top black tail

Fill in the smaller blue feathers and the rest of the black and green area.

Clean your brush. Now we'll paint the tail feathers starting with the green. Using a damp brush, pull the brush downward toward the black marks. Try connecting the outer parts of the marks like a dot-to-dot to form a solid line. After you have brushed this area, pull the color over half of that feather. Continue to do this with all the black colored areas.

hummingbird black tail feathers

With a clean brush do the same to the blue tail marks.

Hummingbird painting blue side of tail feathers


This is what the peacock looks like right after its drawn.

Start with a damp/dry brush and lightly dab the crest feathers on top of its head.

Clean your brush and paint the beak.

Peacock painting beak

Next, using a clean brush, do the top, front part of the head. Be careful and don't let the blue paint touch the beak. Blue will start bleeding into the beak area if you do. If you would like to do a little bit of shading, you can use a clean, dry cotton swab near the top of the head. The dry cotton swab will lift color off of the paper and create a lighter area. Dab your brush on the paper towel and repeat until there is a lighter area.

Peacock using cotton swab to lift color

With a wet brush, work on the neck and underside of the peacock. Run your brush over the blue marks and then pull the color to the center of the body stopping at the wing and green marks.

Peacock painting blue body

Next paint the wing.

Peacock painting wing

For the rest of the body start by using a damp brush on the blue scallop marks. Clean your brush and then with a damp brush start painting the green and yellow marks. Dab the blue area to join the two sections together.

Peacock painting upper body

Next, we will paint the first set of scalloped tail feathers. These are the blue and green "u" shapes. With a clean damp brush mix the two colors together and push the colors up toward the layer above it. Be sure not to touch the lines above it right away, give it a minute or two to dry just a little bit and then go back in to touch up the white space.

Peacock painting first set of blue scallops

The next set of scallops have a green oval with a blue dot and yellow mark outlined in blue. Using a damp brush, start with the blue dot and drag the brush with the blue color over the green oval to mix the colors. Fill in the feather being careful not to touch the yellow. We will paint the yellow later.Peacock painting scallops with yellow

For the larger tail feathers we will start the same way as the previous step with the blue dot. Drag the blue green mixture towards the other scallops and then down towards the blue "U" shape. Leave the yellow and orange marks alone for now. Peacock painting large tail feathers

The extra green lines are flourishes, drag a damp/dry brush over the line and extend the color, you can add other flourishes that come off of these lines as well.

Peacock painting florishes

Lastly, using a clean, damp/dry brush lightly brush over the yellow and the yellow/orange marks.


This is what the sea turtle looks like after it’s drawn

sea turtle design drawn with Cricut watercolor markers

Start with the inside of the eye. 

paint the sea turtle eye leaving a small white highlight

Then paint the spots on the flippers.

paint the spots on the flipper

While those dry, fill in the flipper without the spots, and the bumps on the shell.

Next, do the head. Leave some white space around the eye so the black doesn’t bleed into the rest of the head

paint the sea turtle's head

Go back and paint around the spots on the flipper and the spaces in between the shell bumps.

When the paint has dried, fill in the white space around the eye with the black marker.

completed diy watercolor sea turtle


This is what the whale looks like after it’s drawn

Start with the eye and leave a little highlight in it.

Then work on the underside. Drag a damp brush along the black lines, connecting any broken lines and leaving some white space between that and the black line next to it. 

paint the underbelly stripes of the whale

Then with a wet brush fill in the body of the whale, starting at the tail and working towards the head. Leave a little white space around the eye.

Last, fill in the flipper.

When the paint has dried, fill in the white space around the eye with the black marker.

finished whale watercolor notecard


This is what the octopus looks like drawn.

octopus design drawn with cricut watercolor markers

Start with the eyes. Don’t go beyond the lines because we’ll leave the surrounding white ring this time when we paint the body.

paint the octopus eyes

Working from left to right, paint each of the tentacles.

paint the octopus tentacles

Then paint the head.

paint the octopus head



This is what the seahorse looks like drawn

seahorse drawn with Cricut watercolor markers

Fill in the eye.

paint the seahorse eye

Starting at the end of the tail, paint the body of the sea horse.

starting at the end of the tail paint the body of the seahorse

Continue with the head, leaving white space around the eye.

Then work on the fins. If you’d like, you can leave a thin white highlight line between each section.

Fill in the coral.

When the paint has dried, fill in the white space around the eye with the black marker.


Gift your notecards and prints!

Answers to Your Questions About Making Summer Fruit Watercolor Designs

Q: How do you make a watercolor card?

A: Follow along with my summer fruit watercolor tutorial! If you don’t want to use pre-made blank cards, you can simply fold a piece of watercolor paper to the size you want!

Q: What paper is used for watercolor cards?

A: Watercolor paper is used for cards that use this type of paint because it holds up to plain water.

Q: Can cardstock handle watercolor?

A:  Cardstock deteriorates when wet, so watercolor paper is a better option to make your summer fruit watercolor designs.

Q: Do I need to paint the designs right away?

A: No, you can create the watercolor designs and save them for later. 

Q: Do I ink before or after watercolor?

A: If you’re using a permanent pen or marker on homemade cards, you can ink before or after painting. In some designs, I used a pen with water-based inks before adding the water, so was extra careful to keep the thin pen lines dry!

Q: Is it OK to use watercolor on normal paper?

A: Yes, but the paper will get waterlogged and the watercolor paints won’t blend nicely. It’s always fun to experiment, though!

Q: Can I cut this project on a Cricut Joy?

A: Yes, there are watercolor markers available for the Cricut Joy! You will need to shrink the designs, which may create a different look. See our Resizing Guide for more details. You can make the designs in all different sizes!

Q: Are your free SVGs and PNGs just for personal use or also commercial use?

A: First thing, I’m honored that you’d ask! Yes, you can sell completed projects using these designs (with limitations) along with other designs in my free library — please read about licenses here so you know what you can and cannot do. If you use them, please share photos with us! We love to see them. 

Get my free SVG/DXF/PDF files to make your own summer fruit watercolor project!

(If you do not see the signup form above, click here.)

I love seeing what you make with my designs and how you use them! Please share a photo of your summer fruit watercolor cards in our Facebook group or tag me on social media with #jennifermaker.


Want to remember this? Save this Summer Fruit Watercolors Tutorial to your favorite Pinterest Board!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.