Make Iron On Vinyl shirts using this beautiful heart mandala - Free SVG Cut File to Cut on a Cricut

Share the love!

Mandalas are so popular right now and for good reason! Learn how to make an easy iron on vinyl shirt using a beautiful heart mandala SVG design! Plus, get a great tip for making it easier to weed glitter iron on vinyl.

Iron on vinyl shirts are so fun to make! And glitter iron on … oh, it’s just SO pretty! But the beauty comes at a price, and it can be tricky to cut and apply. But not to worry — I am going to show you how to do it step by step, from beginning to end, by making this gorgeous heart mandala SVG shirt with you! Using glitter iron on vinyl is one of the most requested projects as so many people want to make T-shirts. Cricut is perfect for T-shirt making, as it cuts out iron-in vinyl designs like a champ. My beginner friendly, step by step t-shirt tutorial is perfect if you are brand new to using iron on vinyl! Another incredibly popular post is my Print Then Cut Iron on Transfer T-Shirt tutorial but print then cut can be a little challenging for beginners.

Want to save this project? Enter your email below and we’ll send the project straight to your inbox. 

Make Iron On Vinyl shirts using this beautiful heart mandala - Free SVG Cut File to Cut on a Cricut

Watch my full step-by-step video tutorial on how to Make a Glitter Iron On Shirt with a Cricut!

 

For this project, we’ll be working with GLITTER iron on vinyl, also known as heat transfer vinyl, or HTV. Iron on vinyl is a special type of vinyl that has a heat sensitive adhesive that will stick to fabric and other surfaces when pressed down with a heat source like an EasyPress. You can use an iron but there can be issues with uneven heating when using an iron.

How to make a glitter iron on shirt with a heart mandala with JenniferMaker

Iron-on vinyl comes in various colors, patterns, and textures to create a unique completely personalized pattern. Glitter iron on vinyl is one of the most popular types of iron on vinyl, as it’s sparkly and shiny with a little glam and a lot of bling!

So to make our glitter iron on vinyl shirt, I’m using Cricut glitter iron on vinyl, which I adore. You can use any color — just go for high contrast for the best effect. I recommend a light-colored glitter iron on vinyl with a darker shirt, or vice versa. This heart mandala SVG design is perfect for this glitter iron on vinyl shirt!

Heart mandala tshirt by jennifermaker

This is a pretty intricate design which is why I label it as best for beginner to intermediate. Glitter vinyl usually requires a little more patience to work with because it is a heavier texture compared to normal iron on vinyl and it can be harder to see the cut lines when weeding. But I have a great trick to make weeding vinyl much easier on your eyes. For this trick, you’ll want a basic ball point pen, like a Bic or Papermate pen.

The T-shirt itself can be cotton or polyester or any combination of those. This maroon shirt here is a Hanes Nano V-Neck which is made of 100% cotton (and super comfy, if I do say so myself). But any shirt will work here.

For this heart mandala SVG iron on vinyl shirt, you will need a weeding tool and some time. Weeding means to remove all of the vinyl that we don’t want transferred to our project when we iron it on or use a heat press. So that means we remove all the extra little bits.

To transfer the glitter vinyl to the shirt, I am using the Cricut Easy Press, which works like a champ, and I’ll show you the exact settings I used for it. You can also use a household iron, but keep in mind that the heating can be uneven and unpredictable … yet still possible! You’ll also want a pressing pad or a folded towel.

Let’s start with the supplies you need and then I’ll show you how to make your heart mandala SVG glitter shirt! This post contains some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)! Read my full disclosure policy.

Materials Needed to Make a Heart Mandala SVG Glitter Vinyl Shirt with a Cricut

See the exact items I used in my Amazon shopping list!

Get the free heart mandala shirt tutorial, pattern and SVG in the free JenniferMaker Library

How to Make a Glitter Iron-On Vinyl Shirt with a Heart Mandala SVG

Heart mandala tshirt by jennifermaker

Heart Mandala T-shirt

Yield: 1
Prep Time: 15 minutes
Active Time: 2 hours
Total Time: 2 hours 15 minutes
Difficulty: Easy to Medium
Estimated Cost: $15

Here are my step-by-step directions to make an easy iron-shirt using my heart mandala SVG.

Instructions

STEP 1: GET MY FREE HEART MANDALA SVG


Get my intricate heart mandala decal in my free library — look for design #284. You can find the pattern by searching the page for design 284 and then click it to download an SVG cut file.

If you're not sure how to upload an SVG cut file to Cricut Design Space, watch this helpful video training series I made. If you're on an iPhone or iPad, here's how to download and upload SVG files to the Cricut Design Space app.

This is what the heart mandala SVG looks like in Design Space when you import it:

Heart Mandala SVG uploaded to Cricut Design Space

OPTIONAL: My Heart Mandala SVG is sized to fit a women's t-shirt (9"x9"). To resize the image to fit a standard t-shirt using a Design Space shirt template, click on the Template tab on the left column and search for or scroll down to select a t-shirt template.

Select shirt template in Design Space for the heart mandala t-shirt

Select the type and size of t-shirt in the top menu. Then click and drag the heart design over the t-shirt template. Drag the handle in the lower right corner of the image box to resize the heart and fit it to the template.

TIP: It can be very hard to see the cut lines on glitter iron-on vinyl. One trick is to draw the cut lines with a ball point pen before cutting. This trick works with most iron-on vinyls that are mirrored because the lines are drawn on the back adhesive side. To draw lines, duplicate your heart mandala image in Design Space by clicking on the image and selecting “Duplicate” at the top of the Layers panel.

Attaching the draw layer to the cut layer on the heart mandala svg

Click on the new layer and select “Pen” where it says Operations in the top menu.

Center aligning two layers in Cricut Design Space to make the heart mandala SVG iron on decal

Now you have a cut image and a draw image. Select both by shift-clicking on both layers on the right side. Click on Align at the top and select “Center.”

Changing a layer from cut to pen in the Operations Menu in Cricut Design Space

Both images will now be lined up perfectly. With both images selected, click on “Attach” at the bottom of the Layers panel.

Duplicating the heart mandala SVG in Cricut Design Space

STEP 2: Draw and cut the Heart Mandala SVG

Now all we need to do is draw and cut! Click the green Make It button in the upper right corner. Be sure to toggle the MIRROR tab to on (green)—all iron-on designs must be mirrored before cutting!

Click the green Continue button.

Now set your materials and tools. Click on Material Settings and search for Glitter Iron On Vinyl. Choose it and then click More Pressure to ensure it cuts all the way through. Now you’re all set!

When prompted to load your tools, insert a standard ball point pen in the pen holder if you are drawing the cut lines to help with weeding. If your pen needs a snugger fit, just wrap the lower part of the pen with masking or Washi tape.

Preparing ballpoint pen for the heart mandala tshirt

Make sure your pen is not touching the mat—it should float just above.

Insert pen for the heart mandala tshirt

Place your iron-on vinyl SHINY SIDE DOWN on your cutting mat. Learn how to tell the difference in this tutorial.

Press Go! It takes Cricut Maker about 25 minutes to cut the Heart Mandala design. Double that time if you are also drawing the design with a pen.

This is what your your glitter iron on vinyl will look like when using the ball point pen to outline the cut lines:

Heart mandala with drawn lines

And here's a comparison between glitter iron-on vinyl with the ball point pen lines and without!

Ball point pen on cut lines helps you weed glitter iron on vinyl with the heart mandala SVG

STEP 3: Weed the Heart Mandala iron-on decal

Remove the vinyl from the mat by peeling the mat off the vinyl. Now we remove all the background vinyl bits we don’t want on the shirt. It helps to have a copy of the design nearby to refer to. On the heart mandala design we want to keep the parts in black and weed (remove) all other parts.

Start by peeling the unwanted vinyl (on the cut non-shiny side) off the shiny carrier sheet. You want all the bits you want to keep to stay on the carrier sheet. You can use a weeding tool to help separate the layers if needed.

TIP: as you weed, move all the little discarded bits to the side and away from your work area so they don’t get mixed up!

Weeding vinyl decal for heart mandala tshirt

Be patient, and use your weeding tools to help lift the little pieces. It helps to start pulling up pieces by placing the tool along the cut edges and corners and pulling up the vinyl. Trim your decal and remove the outer edge.

Remove edge of the vinyl for the heart mandala tshirt

Weeding takes about an hour.

STEP 4: Transfer the Vinyl to your T-Shirt

Prewash your t-shirt without fabric softener or make sure it is preshrunk. Place your t-shirt on a firm surface such as a Cricut EasyMat (not an ironing board). Using your EasyPress set to 330º (or an iron on a setting between Cotton and Linen), preheat the shirt for 5 seconds.

Place the iron-on decal on the shirt with the shiny side facing up so the adhesive layer is directly against the shirt.

Align the heart mandala tshirt decal

If you are using an iron, cover the decal with a piece of parchment paper or Teflon sheet to protect a polyester shirt (this is not necessary with a cotton shirt). Since this is a fairly large decal (9 inches), press each third of the design for 20 seconds with medium pressure without sliding the iron. If using an EasyPress, follow these recommendations for your materials.

For this project using Cricut glitter iron on vinyl, I pressed the decal on for 30 seconds with an EasyPress at 330º.

Flip over your t-shirt and add more heat (15 seconds with an EasyPress).

When the carrier sheet and vinyl feel COOL, peel the shiny carrier sheet off. If areas of the design lift up after applying, replace the carrier sheet and repress for 10 seconds.

Remove heart mandala tshirt decal backing

Wash and dry your t-shirt inside out using cold or warm temperatures. Avoid bleach. With gentle care your shirt should last 50+ washes!

Notes

Acknowledgements:

Special thanks to the JenniferMaker Design Fairy Team, specifically Design Fairy Kelly, for helping me design, assemble and make the Heart Mandala T-shirt.

Answers to Your Questions About Making Glitter Iron On Vinyl Shirts

Q: I don’t have a ball point pen. Can I use a Cricut pen?
A: The ball point pen will not transfer or bleed onto your shirt. While we haven’t tested a Cricut pen, we suspect it is more likely to do this and do not advise you use anything other than a basic Bic or Papermate pen.

Q: Can I also use that cool pen tip with infusible ink sheets?
A: No, as infusible ink is cut with the infusible ink side up and any residual ballpoint pen ink could be transferred along with the infusible ink.

Q: My glitter iron on vinyl is really dark. Is there another color of pen I can use?
A: Flip over your glitter iron on vinyl and test with another color to see if you can see it. If you can, use that instead!

Q: I don’t want to spend so much time to draw the lines in with a ball point pen first. Do I really have to do this?
A: No, not at all. This is just a little trick to help those who find it hard to see the cut lines! Most people do not use this method and manage to weed their glitter iron on vinyl anyway!

Q: Why is my glitter vinyl design pulling away from my shirt when I try to peel the carrier sheet?
A: This could happen for a couple different reasons. First, it could be a little too soon to pull it away and you’ll want to let the design cool down a little bit more and then try again. Remember, Cricut Iron On Vinyl is a COOL PEEL. If that still doesn’t work, heat the design a little bit more. Don’t be afraid to do this! 

Q: I heard that I’m supposed to see the texture/fibers of my shirts through my vinyl; is this correct?
A: From my testing, the only time that I can get the fibers to show is when I applied too much heat. My research shows that you don’t always have to see the texture for it to be applied correctly. If my vinyl is applied correctly, I can feel the texture of the fabric when I run my hand over the design, but I cannot see the texture. And with glitter iron on vinyl, it’s going to be even harder to feel the texture of your shirt because the glitter iron on vinyl is thicker than the other stuff. This is especially true of glitter iron on vinyl, as the glitter texture will hide the shirt texture.

Q: Is it bad to overheat my vinyl design?
A:  Yes, too much heat will harm the vinyl’s adhesive and cause your design to peel after you wear or wash it.  

Q: Can I combine and layer colors of vinyl or different vinyls?
A: Yes, you can! Just so long as you don’t try to put anything over Glitter, Mesh or Flocked Vinyl. I have a tutorial on layering iron-on vinyl if you’re ready to take your projects to the next level.  Read my Layered Iron-On Vinyl Tutorial and learn to make a Cute Totebag.

Q: Is there another way I can design my t-shirts so it lasts longer?
A: Yes, I suggest using Infusible Inks if you want a longer lasting design. I have a Cricut Infusible Ink T-Shirt tutorial you might enjoy!

Get my free Heart Mandala SVG cut files to Make a Glitter Iron On Vinyl Shirt!


I’d love to see your glitter vinyl shirts using the my beautiful heart mandala SVG, and I hope you’ll share a photo in my helpful Cricut Facebook group or tag me on social media with #jennifermaker.

Love,

JenniferMaker.com

Want to remember this? Save this Heart Mandala SVG Glitter Vinyl Shirt to your favorite Pinterest board!

Similar Posts

13 Comments

  1. Love this design. Love the idea of drawing first to see to weed better. I tried, but my pen didn’t mark the vinyl. I tried with a Cricut pen, but no marks with it either. Any idea what I might have done wrong? Thank you.

    1. We have only tried the pen we list in the supplies list. Keep playing with it to get a pen that works for you if you don’t have one we used.

        1. Hi Elizabeth! Check the materials list in the blog post for the corresponding design file in the library. Then go to the library and download the file from there.

  2. Hi, Jennifer! I’m new to the Cricut world…and I’m loving it! I’ve been coming back to your site regularly for how-to’s since I got my Maker.

    Recently I inherited a Singer Magic Press 4 (it’s pretty old, but it still works)–do you think I could use this for ironing on HTV to t-shirts and other flat items? I have a Cricut mini-press (waiting a bit to get a larger Easy Press), but it’d be too much to iron on this mandala with that. Thank you!

    1. Hi Mary! I don’t have any experience with the Singer press you mentioned. As long as you know what temperature it is set to you, you should be okay to use it. Give it a try.

      1. I’ll let you know how it turns out! After doing my first vinyl weeding last night, the thought of weeding the mandala has me a little intimidated LOL! Hope you had a nice Valentine’s Day!

  3. I cannot access the free heart pattern only. I know the process but just can’t find pattern. Any help will be appreciated. Thank you.

    1. Hi Diane! Please refer to the materials list in the blog post above to find the corresponding design file number in my library. If you still have trouble, you can reach my team at [email protected]

  4. Hi Jennifer, I made your heart mandala as a vinyl decal for a sign. It is beautiful except I cannot get it to transfer onto the tape so I can apply it. What am I doing wrong?

    1. Hi Kathy! The biggest culprit when it won’t lift off the paper backing is that it was cut just a tad too deep/hard and the paper backing is also trying to come up with it. Flip it over and burnish the back of the paper backing and peel the paper backing off at a slow 45* angle to see if that helps.

  5. Hi Jennifer,

    I would like to put this design on the back of a hoodie! Do I need to increase the heat or heating time? If so, what would you do?

    Thanks!
    Allisen

    1. Hi Allisen! No, your heat temp and time is not based on the material but rather on the iron-on material you are using. Go off of the manufacturer’s recommended settings.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.